Gridfinity generator and drawer planner, printed for you.
Every other Gridfinity generator hands you an STL file. You still need a printer. This one ends with printed parts in the mail. Measure the drawer, plan the grid, pick your colors, and we print every piece in the USA. Ready kits load in one click, and big kits save up to 15% at checkout.
Start from a ready kit
One click loads the whole drawer. You can change every part after.
Or plan your own drawer
Measure the inside of your drawer
That fits a 9 x 7 cell grid with 6u bins.
Gridfinity was created by Zack Freedman. Every part is built to your numbers when you order. Custom bins for single tools are coming next.
Gridfinity bin generator: size, slots, and color
The bin step lets you pick a mix of 1x1, 2x1, split, and 2x2 bins in heights from 2u to 6u, then set the color and material for the whole set. Want one special bin with dividers? The part builder makes single bins up to 6 by 6 cells and shows them in 3D with a live price.
Gridfinity baseplate generator sized to your drawer
Baseplates are planned from your real drawer numbers, not stock sizes. The planner tiles the plates to cover the space and keeps the grid snug wall to wall. That leftover gap every drawer has? Planned for, not ignored.
Gridfinity drawer planner: measure once, fill the whole drawer
Type the inside width, depth, and height of the drawer, in inches or millimeters. The planner turns it into a full kit: plates, a smart bin mix, and one checkout. Not sure how to measure? The drawer setup guide walks through it step by step.
Gridfinity calculator: how many cells fit?
Divide your drawer width by 42, then the depth by 42, and drop the leftovers. That is your grid. A 400 by 500 mm drawer gives a 9 by 11 grid, which is 99 cells to fill. The planner does this math the moment you type your numbers. The full spec lives in the Gridfinity dimensions cheat sheet.
No printer? We print it in the USA and ship it
A full drawer of Gridfinity is 30 hours or more of print time on one machine. Skip all of it. We print your kit to order, in your colors, made in the USA. Still deciding? Here is the honest print-or-buy math.
Generator questions
- Is there a free Gridfinity generator?
- Yes. This one is free to use. Type your drawer size and it plans the baseplates and bins at no cost. You only pay if you order the printed parts. Generators that output STL files are also free, but you still need a printer for those.
- Can I get Gridfinity bins without a 3D printer?
- Yes. That is the whole point of this page. We print every baseplate and bin in the USA after you order and ship them to your door.
- How do I plan a Gridfinity drawer?
- Measure the inside of the drawer: width, depth, and height. Type the numbers here in inches or millimeters. The planner works out the grid, fills it with a bin mix you pick, and prices the whole kit at once.
- What sizes can the bins be?
- Kit bins come in 1x1, 2x1, split 2x1, and 2x2 footprints, in heights from 2u (18 mm) to 6u (46 mm). Need a special bin? The part builder makes any size up to 6 by 6 cells with up to 4 slots each way.
- How much do printed Gridfinity bins cost?
- The price shows live as you plan. Every part is priced by its size and material, and you see the full kit total before checkout. No quote emails, no waiting.
- Do big kits get a discount?
- Yes. A kit with 10 or more printed parts gets 5% off at checkout. 25 or more parts gets 10% off. 50 or more gets 15% off, the top tier. The builder shows your savings while you plan.
New to the system? Start at the Gridfinity hub or read What is Gridfinity?