3D Printed Tech Accessories Test Block

Your printer, running the way it should.

2.4k downloads in the maker community

$12.99

Color: Gray

Printed in the USA when you order.

1.You order it
2.We print it fresh
3.It ships to you

Tests multiple angle arcs (30, 45, 60, 70 degrees) so you can check print quality across different slopes
Includes thickness blocks from 2mm to 10mm so you see how your printer handles thin and thick walls
Features 90-degree bridge sections so you measure overhang strength on your specific setup
One-point detail test lets you verify your printer's precision with fine features

You need to know how your 3D printer performs before printing real parts. This test block shows you exactly what your machine can do.

The design packs multiple tests into one print. Angle arcs from 30 to 70 degrees reveal how your printer handles slopes. Thickness blocks jump from 2mm up to 10mm so you spot where walls get weak. The 90-degree bridges tell you if your printer can handle overhangs without sagging. A single-point detail rounds out the set, pushing your precision to the limit.

Print this once, measure the results, and you'll know your printer's real limits. No guessing. No failed prints on important projects.