3D Printer Test Degrees Calibration Tool

Your printer, running the way it should.

7.1k downloads in the maker community

$8.99

Color: Gray

Printed in the USA when you order.

1.You order it
2.We print it fresh
3.It ships to you

Tests overhang angles from 0 to 90 degrees so you dial in your printer settings correctly.
Works with ABS and PLA filament, so you can benchmark both materials on your machine.
Small size (109x22x15 mm) prints fast and uses minimal plastic for quick test runs.
Includes exact nozzle, layer height, and speed settings so you get repeatable results every time.
Print at 100% infill to catch weak spots and find your printer's true limits.

You want your 3D prints to come out clean and strong on the first try. This test degrees model helps you get there by showing exactly how well your printer handles different angles and overhangs. Instead of wasting time and filament on failed prints, you run this small benchmark piece and learn what your machine can really do.

The model tests angles from low to high so you see where your printer starts to struggle. Use it with nozzles sized 0.2, 0.3, or 0.4 mm. Follow the included settings, print at 40 mm/s, and turn on your cooling fan at full blast after layer 0.5 mm. You get clear, measurable results that tell you if you need to adjust speed, temperature, or support settings.

Works with both ABS and PLA, so you can dial in each material separately. This is the smart way to calibrate instead of guessing and ruining projects.